operatingWeight

netPower

The 4CX Super backhoe is the largest in the JCB line built on 60 years of JCB market leadership. The backhoe features a 109 hp JCB EcoMAX engine that doesn't require a DPF, parallel-lift loader arms, 4 equal-sized tires with 4-wheel steer, and on and off-board diagnostics through JCB LiveLink.

4CX Super

The B110 backhoe provides all the lifting, digging, and breakout forces needed for the toughest applications with superior dump reach for higher truck payloads. The backhoe features industry-leading comfort and visibility, T4F emissions with reduced fuel burn, a curved boom design for enhanced digging performance, and dual swing cylinders for faster cycle times.

B110

The 3CX Super backhoe delivers superior performance, a 20-foot dig depth, and greater reach while saving on fuel with highly efficient hydraulics and a JCB drivetrain. The backhoe features a 109 hp JCB EcoMAX engine that doesn't require a DPF, parallel-lift loader arms, and on and off-board diagnostics through JCB LiveLink.

3CX Super

The B75D is an economy class backhoe built to get the job done. Without all of the frills, the B75D features standard 4WD, a power shuttle synchromesh transmission with 4 forward and 4 reverse gears, and a simple cost-effective 74 hp T4F engine that doesn't require DEF or a DPF.

The 410L is powered by a John Deere PowerTech EWL4045 engine that boosts power, torque, and reliability over previous models. The 410L features a PowerShift transmission with AutoShift, mechanical front-wheel-drive with standard limited-slip differential, Lift Mode, spacious cab with redesigned loader-lever linkage, and standard ride-control.

410 (Backhoe)

Sany's first backhoe loader, the SLB95 is a simple-to-operate tool carrier designed for versatility. The machine features a 4WD transmission with limited slip differential and drive shaft guard, load-sensing hydraulics with pilot controls, an air suspension seat, boom float, and return-to-dig technology.

SLB95

The B95 backhoe provides all the lifting, digging, and breakout forces needed for the toughest applications with superior dump reach for higher truck payloads. The backhoe features industry-leading comfort and visibility, T4F emissions with reduced fuel burn, a curved boom design for enhanced digging performance, and dual swing cylinders for faster cycle times. The B95 is also available in a long reach arrangement with 22' 4" of reach and in Tool Carrier configuration with self-leveling.

The 315SL is powered by a John Deere PowerTech EWL4045 engine that boosts power, torque, and reliability over previous models. The 315SL features a PowerShift transmission with AutoShift, powered Sideshift with vertical stabilizers, mechanical front-wheel-drive with standard limited-slip differential, and a spacious cab with redesigned loader-lever linkage.

The 3CX backhoe delivers best-in-class productivity and efficiency with a comprehensive warranty ideally suited for large fleets or small operations alike. The backhoe features a 74 hp JCB EcoMAX engine that doesn't require DEF, simple components for easier maintenance, JCB AutoCHECK which performs daily checks automatically, and on and off-board diagnostics through JCB LiveLink.

The 310SL Heavy Lift model is powered by a John Deere PowerTech EWL4045 engine that boosts power, torque, and reliability over previous models. The 310SL HL features a PowerShift transmission with AutoShift, mechanical front-wheel-drive with standard limited-slip differential, Lift Mode, spacious cab with redesigned loader-lever linkage, and optional ride-control.

310SL HL

The 416 backhoe is powered by the Cat C3.6 engine and provides up to 10% more performance and 10% better fuel efficiency than previous models. The 416 features standard 4WD, superior hydraulics, and an updated operator station.

The 420 XE backhoe is powered by the Cat C3.6 engine and provides up to 10% more performance, 10% better fuel efficiency, and up to 15% more boom lift than previous models. The 420 XE features selectable parallel lift, standard 4WD, a superior hydraulic system, and an updated operator station with seat mounted controls and programmable loader kickout and return to dig functions.

420 XE

The 430 backhoe is powered by the Cat C3.6 engine and provides up to 10% more performance and 10% better fuel efficiency than previous models. The 430 features standard 4WD, a superior hydraulic system, and an updated operator station.

The 420 backhoe is powered by the Cat C3.6 engine and provides up to 10% more performance, 10% better fuel efficiency, and up to 15% more boom lift than previous models. The 420 features standard 4WD, a superior hydraulic system, and an updated operator station.

The 415 backhoe is powered by the Cat C3.6 engine and provides up to 10% more performance and 10% better fuel efficiency than previous models. The 415 features standard 4WD, a superior hydraulic system, and an updated operator station.

The 310SL is powered by a John Deere PowerTech EWL4045 engine that boosts power, torque, and reliability over previous models. The 310SL features a PowerShift transmission with AutoShift, mechanical front-wheel-drive with standard limited-slip differential, Lift Mode, spacious cab with redesigned loader-lever linkage, and standard ride-control.

310SL

The 310L is powered by a John Deere PowerTech EWL4045 engine that boosts power, torque, and reliability over previous models. The 310L features a PowerShift transmission, mechanical front-wheel-drive with optional limited-slip differential, spacious cab with redesigned loader-lever linkage, and standard ride-control.

310 (Backhoe)

The 710L is powered by a John Deere PowerTech engine that boosts power, torque, and reliability over previous models. The 710L features a PowerShift transmission with AutoShift, mechanical front-wheel-drive with standard limited-slip differential, Lift Mode, spacious cab with redesigned loader-lever linkage, and standard ride-control.

The 310L EP is powered by a 3.3L Yanmar engine that complies with T4F emissions regulations without an aftertreatment system. The 310L EP features a Synchromesh 4-speed manual transmission, mechanical front-wheel-drive with open differential, spacious cab with redesigned loader-lever linkage, and standard ride-control.

310 EP

The 3CX Compact backhoe is designed for big performance in a small package ideal for urban construction projects where a tight turning radius and the ability to work in a single lane of traffic are critical. The backhoe features a side-shift chassis able to dig near structures, 4WD standard, 25 mph road speed, and a skid steer quick hitch which allows the machine to use most skid steer attachments.

3CX Compact

The 440 backhoe is powered by the Cat C4.4 engine and provides up to 19% more breakout force and 15% higher lift capacity than previous models. The 440 features advanced hydraulics that match power to work at hand, programmable bucket kickout and return-to-dig, and parallel lift.

The 450 backhoe is powered by the Cat C4.4 engine and provides up to 19% more breakout force and 15% higher lift capacity than previous models. The 450 features advanced hydraulics that match power to work at hand, programmable bucket kickout and return-to-dig, and parallel lift.

The M62 backhoe loader is great for construction and landscaping applications providing 3,960 lbs of lift capacity and nearly 170" of digging depth. Powered by a Kubota diesel engine, the loader features standard 4WD, independent PTO, sloped loader arms and hood design for improved visibility, headlights and work lights, and a 3-point hitch.

The L47 backhoe loader is great for contractors, landscapers, and rental houses providing 2,848 lbs of lift capacity and 121" of digging depth. Powered by a Kubota diesel engine, the loader features standard 4WD, independent PTO, sloped loader arms and hood design for improved visibility, headlights and work lights, and a 3-point hitch.

The 1CXT is an innovative hybrid product from JCB that pairs the versatility of a backhoe with the maneuverability of a compact track loader. The loader features a compact size allowing it to go where most backhoes cannot, an optional hand-held auxiliary tool circuit, 90-degree excavation, a sub-10,000 lb transport weight, and a universal quick hitch that is compatible with most skid steer attachments.

1CXT

The B26 backhoe loader provides maximum versatility for construction and landscaping applications. Powered by a Kubota diesel engine, the B26 features standard 4WD, indpendent PTO, sloped loader arms and hood design for improved visibility, headlights and work lights, and a 3-point hitch.

The Case 580 Super N WT (Wide Track) comes with a more powerful engine, maximum stability at nearly 102 inches wide, and an upgraded cab with fingertip controls. It also features fuel-saving ECO mode, ProControl precision, SiteWatch telematics, and PowerBoost and can be configured with Comfort Steer for truck-loading and Auto-Ride Control.

Case 580 Super WT

Similar Models

JCB 4CX Super

New Holland B110

JCB 3CX Super

New Holland B75

John Deere 410 (Backhoe)

Sany SLB95

New Holland B95

John Deere 315

JCB 3CX

John Deere 310SL HL

Caterpillar 416

Caterpillar 420 XE

Compare quotes from the world's top equipment manufacturers