operatingWeight

netPower

undercarriage

tailSwing

The 19C compact excavator is easily transportable with 10 tie-down points and a low transportation weight that doesn't require a commercial driver's license. The conventional tailswing excavator features 500 hour greasing intervals, 100% steel bodywork for extra durability, and a swing-out full-width counterweight for easy service access and component protection.

The 19C-1E is JCB's first fully electric mini excavator great for urban or indoor work where noise and emissions must be kept to a minimum. The machine offers the same power and more torque than its diesel-powered counterpart and the charging cost is roughly 50% that of diesel fuel. The E-TECH excavator features an onboard charger with 3 lithium-ion batteries, a retractable undercarriage, a load-sensing hydraulic system, a twin flow auxiliary circuit, and 500-hour greasing intervals.

19-E

The TB216H mini excavator comes with both an electric motor and diesel engine allowing operators to swap back and forth between operating modes without sacrificing performance. The hybrid technology allows the machine the versatility of working in environments with the strictest noise and clean air requirements. The machine features a compact design with minimal tail swing, a retractable undercarriage, standard long stick with thumb mount, load-sensing two-speed travel, and cushioned cylinders that protect the machine from shock.

TB216H

The compact E20 excavator can access the tightest areas with a retracted width of only 36". The E20 can expand to 54" for a wider working width and features zero-tailswing to avoid damaging obstacles on the tightest jobsites.

The EC20E compact excavator is designed with improved traction and digging forces for landscaping and small utility jobs. The excavator features an expandable undercarriage, adjustable hydraulic flows for maximum attachment versatility, recessed steel side panels to prevent damage, simple uncluttered controls, ROPS canopy/cab, hinged fuel tank for easy engine access, and simple transportation with its lightweight design and large tie-down points.

EC20

The SY16C mini excavator is designed to be nimble for jobs in tight workspaces like forestry, indoor demolition, and narrow urban locations. The excavator features minimal tail swing design with independent boom swing and an intelligent control system that matches pump output to engine power for maximum efficiency.

SY16

The E17 compact excavator will make you more confident working on tight jobsites next to buildings, foundations, and roadways with its compact radius design and offset boom. The excavator features a standard dozer blade, auxiliary hydraulics, better ground clearance, Auto-Shift travel system, Auto-Idle fuel saving technology, and a comfortable canopy working environment.

The CX17C weighs in a 1.7 metric tons, can dig to 7' 3" depth, and provides 3,490 lbf of breakout force. Small enough to be easily transported and fit into the tightest spaces, the CX17C also features standard auxiliary hydrualics and a backfill blade.

CX17

The TB216 mini excavator has been redesigned for greater performance, serviceability, and operator comfort. The machine features a compact design with minimal tail swing, a retractable undercarriage, standard long stick with thumb mount, load-sensing two-speed travel, and cushioned cylinders that protect the machine from shock.

TB216

The 18Z compact excavator is the smallest and most easily transportable in the JCB line with 10 tie-down points and a low transportation weight that doesn't require a commercial driver's license. The zero tailswing excavator features 500 hour greasing intervals, 100% steel bodywork for extra durability, and a swing-out counterweight for easy service access.

The ZX17 mini excavator is able to work in the tightest areas with a variable-width undercarriage, reduced-tail swing design, and independent boom swing. The machine features a high-torque T4F engine that does not require aftertreatment, side-by-side coolers, rubber tracks with steel cores, a pattern changer, cab or canopy options, and tool-free daily checkpoints.

ZX17

The 17G mini excavator is able to work in the tightest areas with a variable-width undercarriage, reduced-tail swing design, and independent boom swing. The machine features a high-torque T4F engine that does not require aftertreatment, side-by-side coolers, rubber tracks with steel cores, a pattern changer, cab or canopy options, and tool-free daily checkpoints.

The ECR18E is a short-swing compact radius machine in the 1.8 ton size class built to fit in the tightest workspaces. The machine has the smallest radius in Volvo's line-up and can fit in spaces as narrow as 39 inches. It features recessed steel side panels to prevent damage, simple uncluttered controls, ROPS canopy, hinged fuel tank for easy engine access, and simple transportation with its lightweight design and large tie-down points.

ECR18

The KX018-4 compact excavator delivers performance and efficiency in a maneuverable, versatile package. The excavator features a Tier 4 Kubota engine, variable width undercarriage, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

KX018

The R17Z compact excavator features a zero tail swing design for working in tight agriculture, landscaping, public works, and utility applications. The excavator features a T4F Kubota engine, offset boom swing, dozer blade, an automotive style display, and a reinforced canopy structure for maximum safety.

The U17-4 compact excavator delivers performance and efficiency in a compact radius package. The excavator features a Tier 4 Kubota engine, variable width undercarriage, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

The SK17SR mini excavator is designed for residential, landscaping, and light industrial applications with its zero tail swing design and self-cleaning retractable undercarriage. The excavator features an expandable dozer blade, cylinder rod guards, frame protection, offset boom for digging along walls, and class-leading digging depth.

SK17

The TB225 mini excavator fits in a size class that makes it extremely versatile and productive. Mixing features typically found in both small and larger machines, the machine offers a hydraulically retractable undercarriage, standard long stick with thumb mount, electronic throttle and auxiliary controls, load-sensing two-speed travel, and cushioned cylinders that protect the machine from shock.

TB225

The R25Z compact excavator features a zero tail swing design for working in tight agriculture, landscaping, public works, and road building applications. The excavator features a T4F Kubota engine, offset boom swing, dozer blade, an automotive style display, a reinforced cab structure, and a dual-lock coupler for maximum versatility.

The ECR25D compact excavator is designed with several innovations including those for easy transportation. The excavator features a single variable displacement pump to reduce fuel burn, auto-idle and auto-engine shutdown, effortless fingertip controls, two-speed travel, and quick, safe attachment change outs with Volvo's pin-grabber coupler.

ECR25

The E26 compact excavator will make you more confident working on tight jobsites next to buildings, foundations, and roadways with its compact radius design and offset boom. The excavator features a standard dozer blade, auxiliary hydraulics, better ground clearance, Auto-Shift travel system, Auto-Idle fuel saving technology, and a wide C-Series cab for comfort and all-around visibility.

The Tier 4 Final CX26C provides the power and reach needed in a lightweight, zero-tailswing footprint that's easy to maneuver and transport. The CX26C is an ideal solution for landscapers and utility contractors trying to minimize disruption and yard damage. Features include standard blade, auxiliary hydraulics, and an optional cab.

CX26

The U25S compact excavator delivers performance and efficiency in a compact radius package. The excavator features a Tier 4 Kubota engine, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

The SK25SR mini excavator is designed for demanding, tight jobsites with its zero tail swing design and class-leading lifting capacity and dig depth. The excavator features a dozer blade, cylinder rod guards, frame protection, offset boom for digging along walls, reclining seat with LCD display, and auto deceleration option.

SK25

The ZX26 mini excavator is able to work in the tightest areas with a reduced-tail swing design and independent boom swing. The machine features a high-torque T4F engine that does not require aftertreatment, side-by-side coolers, rubber tracks with steel cores, a pattern changer, cab or canopy options, and tool-free daily checkpoints.

ZX26

The ultra-compact E10 zero-tailswing excavator can access the tightest areas where manual labor is the only other option. The E10 can retract within 28" to navigate narrow openings and work next to obstacles that other excavators cannot.

The U27-4 compact excavator delivers performance and efficiency in a compact radius package. The excavator features a Tier 4 Kubota engine, optional angle blade, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

The EC27D compact excavator is a versatile machine built for a variety of applications with excellent lifting and digging capabilities. The excavator can be tailored to your business needs with a variety of attachments and services available.

EC27

The Tier 4 Final CX30C provides up to 4,500 lbs of digging forces in a zero-tailswing, easy-to-transport size. The CX30C features proportional controls, automatic 2-speed travel, and an adjustable offset boom for working along structures and in tight spaces.

CX30

The TB210R ultra compact excavator is Takeuchi's smallest excavator ideal for the most confined jobsites. The machine features minimal tail swing, a retractable undercarriage, pilot controls, a pattern changer, and foldable, ROPS frame.

TB210

The SY26U mini excavator delivers power and performance in a small package ideal for earthmoving and road-building projects. The excavator features a zero tail swing design with independent boom swing and an intelligent control system that matches pump output to engine power for maximum efficiency.

SY26

The 26G mini excavator is able to work in the tightest areas with a reduced-tail swing design and independent boom swing. The machine features a high-torque T4F engine that does not require aftertreatment, side-by-side coolers, rubber tracks with steel cores, a pattern changer, cab or canopy options, and tool-free daily checkpoints.

The DX27-7 mini excavator is a new size class completely designed by Doosan after the split up with Bobcat. The machine features a rearview camera, a 3-foot 7-inch thumb ready stick, and a 11.8-inch rubber track undercarriage.&nbsp;

DX27

The K008-3 compact excavator delivers surprising performance and efficiency in a small package. The excavator features a Tier 4 Kubota engine, variable width undercarriage, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

K008

The KX71-3S compact excavator is available with a spacious cab and hydraulic angle blade options for additional comfort and backfilling versatility. The excavator features a Tier 4 Kubota engine, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

KX71

The E30 compact excavator will make you more confident working on tight jobsites next to buildings, foundations, and roadways with its compact radius design and offset boom. The excavator features a standard dozer blade, auxiliary hydraulics, better ground clearance, Auto-Shift travel system, Auto-Idle fuel saving technology, and a wide C-Series cab for comfort and all-around visibility.

The TB230 mini excavator has a narrow width allowing it to fit into tight sites with a conventional tail swing design that offers maximum stability and operator space. The machine features smooth operation thanks to a variable displacement piston pump, a standard long stick with thumb mount, load-sensing two-speed travel, cushioned cylinders that protect the machine from shock, and durable steel body panels with heavy-duty counterweight to protect internal components.

TB230

The compact E26 excavator can access tight areas with excellent flotation for minimal underfoot disturbance. The E26 comes with a standard long arm configuration and features minimal tailswing to avoid damage to the machine and surrounding obstacles.

The R30Z compact excavator features a zero tail swing design for working in tight agriculture, landscaping, public works, and road building applications. The excavator features a T4F Kubota engine, offset boom swing, dozer blade, an automotive style display, a reinforced cab structure, and a dual-lock coupler for maximum versatility.

The ZX30 mini excavator is able to power through tough work in tight areas with a reduced-tail swing design and impressive breakout and lift forces. The machine features a high-torque T4F engine that does not require aftertreatment, large entryways with great visibility, a pattern changer, and cab or canopy options.

ZX30

The E33 compact excavator will make you more confident working on tight jobsites next to buildings, foundations, and roadways with its compact radius design and offset boom. The excavator features a standard dozer blade, auxiliary hydraulics, better ground clearance, Auto-Shift travel system, Auto-Idle fuel saving technology, and a wide C-Series cab for comfort and all-around visibility.

Part of the new R2-Series, the E32 compact excavator provides optimal power and maneuverability in a conventional tailswing design. The E32 comes with a blade, low-effort joysticks, auxiliary hydraulics, a rearview camera, and long arm or clamp-ready extendable arm options.

The 30G mini excavator is able to power through tough work in tight areas with a reduced-tail swing design and impressive breakout and lift forces. The machine features a high-torque T4F engine that does not require aftertreatment, large entryways with great visibility, a pattern changer, and cab or canopy options.

The SK30SR mini excavator packs exclusive Kobelco technology like new Energy Conservation Mode and an iNDr Cooling System that ensures quiet operation free from dust. The excavator features a wide working range, one-touch deceleration, dozer blade with 4-way option, safe and reliable cab or canopy options, a boom-mounted work light, and easy access to the engine compartment.

SK30

The KX033-4 compact excavator comes available with extended stick and hydraulic angle blade options for additional versatility. The excavator features a Tier 4 Kubota engine, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

KX033

The TB235 mini excavator makes transportation a breeze and operators more efficient with an in-cab multi-information display. The machine features smooth operation thanks to a variable displacement piston pump, a standard long stick with thumb mount, load-sensing two-speed travel, cushioned cylinders that protect the machine from shock, and durable steel body panels with heavy-duty counterweight to protect internal components.

TB235

Part of the new R2-Series, the E35 compact excavator is a popular option in the 3-ton size with a zero tailswing design. The E35 features an optional angle blade, low-effort joysticks, auxiliary hydraulics, a rearview camera, and long arm or clamp-ready extendable arm options.

E35 (25 hp)

The ZX35 mini excavator is able to work in tight areas with a zero-tail-swing design and work efficiently with a T4F engine with auto-idle technology. The machine features a choice of rubber, steel, or steel tracks with rubber pads, a redesigned cab with greater visibility, a pattern changer, cab or canopy options, hydraulic angle backfill blade, and a tilting operator station for easy maintenance.&nbsp;

ZX35

The EC35D compact excavator is a versatile machine built for a variety of applications with excellent lifting and digging capabilities. The excavator can be tailored to your business needs with a variety of attachments and services available.

EC35

The New Generation 35Z compact excavator is a 3.5 metric ton zero-tailswing excavator built for working in tight areas. The machine features great maneuverability with 100% steel bodywork and has no need for electronic controls, aftertreatment, or EGR.

E35 (33 hp)

The E37 compact excavator will make you more confident working on tight jobsites next to buildings, foundations, and roadways with its compact radius design and offset boom. The excavator features a standard dozer blade, auxiliary hydraulics, better ground clearance, Auto-Shift travel system, Auto-Idle fuel saving technology, and a wide C-Series cab for comfort and all-around visibility.

The Tier 4 Final CX37C provides up to 6,900 lbs of digging forces and 10' 3" of dig depth in a zero-tailswing, easy-to-transport size. The CX37C features auxiliary hydraulics, a backfill blade, two-speed travel, and an adjustable offset boom for working along structures and in tight spaces.

CX37

The U35-4 compact excavator is an award winning compact radius excavator designed with the operator experience in mind. The excavator features a Tier 4 Kubota engine, optional angle blade, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

The 35G mini excavator is able to work in tight areas with a zero-tail-swing design and work efficiently with a T4F engine with auto-idle technology. The machine features a choice of rubber, steel, or steel tracks with rubber pads, a redesigned cab with greater visibility, a pattern changer, cab or canopy options, hydraulic angle backfill blade, and a tilting operator station for easy maintenance.&nbsp;

The SK35SR mini excavator packs exclusive Kobelco technology like new Energy Conservation Mode and an iNDr Cooling System that ensures quiet operation free from dust. The excavator features a wide working range, one-touch deceleration, dozer blade with 4-way option, safe and reliable cab or canopy options, a boom-mounted work light, and easy access to the engine compartment.

SK35

The New Generation 36C compact excavator is a 3.6 metric ton conventional tailswing excavator built for maximum performance on smaller jobsites. The machine features great maneuverability with 100% steel bodywork and has no need for electronic controls, aftertreatment, or EGR.

The PC35MR-5 mini excavator has a minimum swing radius design to fit into confined workspaces. The excavator features standard auxiliary hydraulics, thumb bracket, two power modes, proportional pilot controlled joysticks, rubber/steel/roadliner track options, automatic two-speed travel, and pattern change valve.&nbsp;

PC35

The R35Z compact excavator features a zero tail swing design for working in tight agriculture, landscaping, public works, and road building applications. The excavator features a T4F Yanmar engine, offset boom swing, dozer blade, an automotive style display, a reinforced cab structure, and a dual-lock coupler for maximum versatility.

The SY35U mini excavator delivers power and performance in a small package ideal for earthmoving and road-building projects. The excavator features a zero tail swing design with independent boom swing and an intelligent control system that matches pump output to engine power for maximum efficiency.

SY35

The ECR40D compact excavator has a short swing radius to prevent damage while working in tight spaces. The excavator features a comfortable cab with simple, intuitive controls, high-performance hydraulics, and simple serviceability.

ECR40

The TB240 mini excavator is powerful and offers a wide working range as well as a spacious cab for all day operation. The machine features smooth operation thanks to a variable displacement piston pump, a standard long stick with thumb mount, load-sensing two-speed travel, cushioned cylinders that protect the machine from shock, and a deluxe suspension seat with multifunction, LED monitor.

TB240

The DX35-7 mini excavator is a 3 ton machine with zero tail swing design allowing it to work where other machines cannot. The machine features auxiliary hydraulic circuit, wide cab with A/C, LED lights, a 5.7-inch color LCD monitor, and optional rearview camera, cast counterweight, and secondary auxiliary hydraulics. The DX35-7 is the Doosan-designed replacement for the DX35-5 which was built by Bobcat.

DX35

The KX040-4 compact excavator comes available with a hydraulic angle blade or hydraulic 6-in-1 blade options for additional backfilling and grading versatility. The excavator features a Tier 4 Kubota engine, 2-speed travel, changeable pattern control, spacious operator station, and auxiliary control and flow capable of running hydraulic attachments.

KX040

The new R2-Series E42 compact excavator features a redesigned Bobcat engine which provides enhanced hydraulic performance and efficiency. The conventional tailswing machine offers great balance with greater lift capacities. The E42 features an improved cooling system, hydraulic control valve, low-effort joysticks, and can be configured with optional long or extendable sticks, an upgraded display, angle blade, and rear camera.

The DX42-5K mini excavator is a highly maneuverable 4-5 ton size machine that offers best-in-class cycle times. The excavator features a dozer blade, closed center valve piston pump, load-sensing hydraulics, cushioned cylinders, integrated slew brakes, on-board diagnostics, and expanded cab with low-effort joysticks.

DX42

The 45Z zero tailswing excavator is designed to be rental-ready as one of the most powerful compact excavators that can be towed with a pickup truck without need for a commercial driver's license. The excavator features a powerful T4F engine that doesn't require a DPF, 100% steel bodywork for extra durability, 500-hour greasing intervals, and a variable geometry hitch for use with an array of attachments.

The SK45SRX short tail swing mini excavator packs exclusive Kobelco technology like new Energy Conservation Mode and an iNDr Cooling System that ensures quiet operation free from dust. The excavator features a wide working range, one-touch deceleration, dozer blade with 4-way option, safe and reliable cab or canopy options, a boom-mounted work light, and easy access to the engine compartment.

SK45

The ZX50 mini excavator is able to work in tight areas with a zero-tail-swing design and work efficiently with a T4F engine with auto-idle technology. The machine features a choice of rubber, steel, or steel tracks with rubber pads, a redesigned cab with greater visibility, a pattern changer, cab or canopy options, hydraulic angle backfill blade, and a tilting operator station for easy maintenance.&nbsp;

ZX50

The 50Z zero tailswing excavator is a fully-featured machine that delivers the production you expect and is economical to own. The excavator features a powerful T4F engine that doesn't require a DPF, proven components, automatic machine health checks, 500 hour greasing intervals, and is tilt-rotator ready.

The new R2-Series E50 compact excavator features a redesigned Bobcat engine which provides enhanced hydraulic performance and efficiency. The minimal tailswing machine offers flexibility in tight workspaces with less than 1" of overhang. The E50 features an improved cooling system, hydraulic control valve, low-effort joysticks, and can be configured with an optional long stick, an upgraded display, automatic heat and air, and rear camera.

The PC45MR-5 mini excavator has a minimum swing radius design to fit into confined workspaces. The excavator features standard auxiliary hydraulics, thumb bracket, two power modes, proportional pilot controlled joysticks, rubber/steel/roadliner track options, automatic two-speed travel, and pattern change valve.&nbsp;

PC45

The 50G mini excavator is able to work in tight areas with a zero-tail-swing design and work efficiently with a T4F engine with auto-idle technology. The machine features a choice of rubber, steel, or steel tracks with rubber pads, a redesigned cab with greater visibility, a pattern changer, cab or canopy options, hydraulic angle backfill blade, and a tilting operator station for easy maintenance.&nbsp;

The U48-5 compact radius excavator comes with several new features including 7" color display, keyless start, rearview camera, automatic one-way flow 3rd line, dual adjustable seat and console with improved AC and LED working lights. In addition, the excavator features a Tier 4 Kubota engine, optional angle blade, 2-speed travel, changeable pattern control, and a spacious operator station.

The SK55SRX short tail swing mini excavator packs exclusive Kobelco technology like new Energy Conservation Mode and an iNDr Cooling System that ensures quiet operation free from dust. The excavator features a wide working range, one-touch deceleration, dozer blade with 4-way option, safe and reliable cab or canopy options, a boom-mounted work light, and easy access to the engine compartment.

SK55

The F-generation 5-ton ECR50 has a zero tail swing design with best-in-class lifting capacity. The machine's boom swings within the track width allowing it to dig offset directly alongside obstacles. The ECR50 features intuitive fingertip controls with travel pedals, automatic two-speed travel, pre-programmed hydraulic settings for simple attachment changes, and simplified maintenance with 50-hour greasing intervals.

ECR50

The TB250 is a 5 ton mini excavator with a 39 hp T4F engine capable of running a variety of hydraulic attachments. The machine features smooth operation thanks to a variable displacement piston pump, a standard long stick with thumb mount, load-sensing two-speed travel, cushioned cylinders that protect the machine from shock, and durable steel body panels with heavy-duty counterweight to protect internal components.

TB250

The EW60E is built to work all day long in comfort with a larger and more productive cab environment. The excavator features a powerful T4F engine, smooth multifunction operation, optional fixed or offset boom, long dozer blade, a top speed of nearly 19 mph, better all around visibility, 7" color display, adjustable seat, and new ergonomic joystick controls.

EW60

The PC55MR-5 mini excavator has a minimum swing radius design to fit into confined workspaces. The excavator features standard auxiliary hydraulics, thumb bracket, two power modes, proportional pilot controlled joysticks, rubber/steel/roadliner track options, automatic two-speed travel, and pattern change valve.&nbsp;

PC55

The SY50U compact excavator has a zero tail swing design with independent boom swing for working in tight spaces. The excavator features an advanced hydraulic system, selectable work modes to optimize fuel burn, and easy accessible service points with detachable radiator screen for simple maintenance.

SY50

The 55Z zero tailswing excavator is a fully-featured machine that delivers the production you expect and is economical to own. The excavator features a powerful T4F engine that doesn't require a DPF, load-sensing hydraulics, 100% steel bodywork, and class-leading 500-hour greasing intervals.

The U55-5 compact radius excavator comes with several new features including 7" color display, keyless start, rearview camera, automatic one-way flow 3rd line, dual adjustable seat and console with improved AC and LED working lights. In addition, the excavator features a Tier 4 Kubota engine, optional angle blade, 2-speed travel, changeable pattern control, and a spacious operator station.

The CX57C provides best-in-class horsepower in a conventional tailswing design and larger counterweight for additional power and performance. The CX57C features a standard deluxe cab with LCD touch screen display, two-speed travel, and adjustable offset boom.

CX57

The E57 compact excavator will make you more confident working on tight jobsites next to buildings, foundations, and roadways with its compact radius design and offset boom. The excavator features a standard dozer blade, auxiliary hydraulics, better ground clearance, Auto-Shift travel system, Auto-Idle fuel saving technology, and a wide C-Series cab for comfort and all-around visibility.

The DX50Z-7 mini excavator is a 5 ton machine with zero tail swing design allowing it to work where other machines cannot. The machine features a standard enclosed cab with A/C, bucket, coupler, and thumb, and optional heated, adjustable seat and steel tracks. The DX50Z-7 is the Doosan-designed replacement for the DX50-5K which was built by Bobcat.

DX50

The TB260 mini excavator is fit for a wide array of applications with its conventional tail swing that offers improved stability and larger cab. The machine features smooth operation thanks to a variable displacement piston pump, a standard long stick with thumb mount, 3 auxiliary circuits, load-sensing two-speed travel, cushioned cylinders that protect the machine from shock, and durable steel body panels with heavy-duty counterweight to protect internal components.

TB260

The KX057-5 compact excavator comes with several new features including 7" color display, keyless start, rearview camera, automatic one-way flow 3rd line, dual adjustable seat and console with improved AC and LED working lights. In addition, the excavator features a Tier 4 Kubota engine, optional angle blade, 2-speed travel, changeable pattern control, and a spacious operator station.

KX057

The R55W wheeled excavator is the smallest in Hyundai's line-up. The excavator is great for roadwork or urban projects where mobility is key. It features advanced hydraulics, offset boom swing, dozer blade, an automotive style display with optional rearview camera, a reinforced cab structure, and a dual-lock coupler for maximum versatility.

R55W

The R55 compact excavator features a conventional tail swing design for enhanced performance in agriculture, landscaping, public works, and road building applications. The excavator features a T4F Yanmar engine, offset boom swing, dozer blade, an automotive style display with rearview camera, a reinforced cab structure, and a dual-lock coupler for maximum versatility.

The EC60E is built to work all day long in comfort with a larger and more productive cab environment. The excavator features a powerful 58 hp engine, smooth multifunction operation, optional fixed or offset boom, long dozer blade, customizable hydraulic flows, better all around visibility, 7" color display, adjustable seat, and new ergonomic joystick controls.

EC60

The F-generation 5-ton ECR50 has a short tail swing design with superior stability, breakout forces, and lifting capacities. The ECR58 features intelligent features like load sensing, flow sharing, and ECO mode, the most spacious cab in the industry, intuitive fingertip controls, pre-programmed hydraulic settings for simple attachment changes, and a variety of attachments including the Steelwrist Tiltrotator.

ECR58

The TB257FR mini excavator has a side-to-side offset boom coupled with reduced tail swing design to offer unmatched visibility and a compact swing radius. The machine features smooth operation thanks to a variable displacement piston pump, a standard long stick with thumb mount, 3 auxiliary circuits, load-sensing two-speed travel, cushioned cylinders that protect the machine from shock, and durable steel body panels with heavy-duty counterweight to protect internal components.

TB257

The E60 compact excavator will make you more confident working on tight jobsites next to buildings, foundations, and roadways with its compact radius design and offset boom. The excavator features a standard dozer blade, auxiliary hydraulics, better ground clearance, Auto-Shift travel system, Auto-Idle fuel saving technology, and a wide C-Series cab for comfort and all-around visibility.

The Tier 4 Final CX60C is the largest and most powerful mini excavator in the Case line-up. With best-in-class horsepower and adjustable boom, the reduced-radius machine can make quick work of the tightest jobs. The CX60C also features auxiliary hydraulics, a backfill blade, two-speed travel, and deluxe cab.

CX60

The SY60C compact excavator is made to last with a durable design for rough working conditions. The excavator features a short swing radius with independent boom swing, an optimized, load-sensing hydraulics system, selectable work modes to optimize fuel burn, and easy accessible service points with detachable radiator screen for simple maintenance.

SY60

The R60CR compact excavator features a compact radius swing design for working in tight agriculture, landscaping, public works, and road building applications. The excavator features a T4F Kubota engine, offset boom swing, dozer blade, an automotive style display with rearview camera, a reinforced cab structure, and a dual-lock coupler for maximum versatility.

The 60G mini excavator is able to work in tight areas with a reduced-tail-swing design and work efficiently with a T4F engine with auto-idle technology. The machine features a choice of rubber, steel, or steel tracks with rubber pads, a redesigned cab with greater visibility, a pattern changer, cab or canopy options, hydraulic angle backfill blade, and a tilting operator station for easy maintenance.&nbsp;

The ZX60 mini excavator is able to work in tight areas with a reduced-tail-swing design and work efficiently with a T4F engine with auto-idle technology. The machine features a choice of rubber, steel, or steel tracks with rubber pads, a redesigned cab with greater visibility, a pattern changer, cab or canopy options, hydraulic angle backfill blade, and a tilting operator station for easy maintenance.&nbsp;

ZX60

The E60 compact excavator is a 6-ton machine features a redesigned Bobcat engine which makes simplifies maintenance. The conventional tailswing machine offers improved over-the-side lift capacity. The E60 features an improved cooling system, low-effort joysticks, and can be configured with optional widescreen touch display, rearview camera, automatic heat and air, and Bobcat depth-check 2D grade system.

The DX62R-3 mini excavator's reduced tail swing of only 4.9 inches makes it ideal for crowded jobsites. The machine's swing center has been shifted forward to extend digging reach by nearly a foot. The excavator features exceptional slew torque for slope work, selectable auxiliary flow, Auto-Shift travel, and a deluxe color display with password protection to deter theft.

DX62

The 301.7 compact radius mini excavator delivers more power and performance in a small package with faster cycle times and customizable operator settings. The machine is packed with technology including industry first features including stick steer and cruise control and provides all day comfort with a suspension seat and adjustable armrests. Common parts, lower repair costs, and a tilt-up cab reduce downtime and contribute to 15% overall lower ownership costs.

Caterpillar 301.7 CR

Model History

Similar Models

JCB 19

JCB 19-E

Takeuchi TB216H

Bobcat E20

Volvo EC20

Sany SY16

New Holland E17

Case CX17

Takeuchi TB216

JCB 18

Hitachi ZX17

John Deere 17

Compare quotes from the world's top equipment manufacturers