operatingWeight

netPower

undercarriage

tailSwing

The PC210-11 mid-size excavator has improved engine and hydraulic pump logic for superior multi-function capabilities. The excavator features high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat. The PC210 is available in waste handler, super long reach, log loader, and iMC grade control configurations.

PC210

The SY215C is powered by a Cummins diesel engine with fuel efficient technologies. The 20-ton excavator features an optimized positive flow hydraulic system and reliable powertrain and hydraulic components designed for long service life.

SY215

The 210G mid-size excavator offers scalable technology options from entry-level Excavator Grade Guidance or fully integrated SmartGrade. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, and extended oil change intervals.

The DX225LC-5 crawler excavator is a popular machine in the 50,000 pound size class for its ability to work on jobsites small and large. The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, reinforced linkage, and extended greasing intervals.

DX225

The ECR235E provides the smooth and efficient operation you're used to in a compact, short swing design. The mid-size excavator is built with the operator in mind with a new comfort cab and is designed to quickly switch between a multitude of attachments with its optimized hydraulic system.

ECR235

The 220X is the first of JCB's new X SERIES, the most advanced tracked excavator in JCB history with exceptional performance and reliability. The 20-ton excavator features best-in-class tear out forces, large-diameter hydraulic hoses, auto-stop and auto-idle for added fuel savings, customizable proportional controls, power boost, and the JCB CommandPlus comfort cab.

The SK210 Hybrid excavator uses a hybrid system with a generator, electric swing motor, and a lithium-ion battery to store and assist the engine during high-load operations. During swing deceleration or low-load operations, the battery is recharged all adding up to a 15% reduction in fuel burn, 7% increased productivity, and 88% decrease in NOx emissions.

SK210 Hybrid

The HX235A compact radius excavator is useful in a wide array of applications on tight jobsites where reliability is critical. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through new features like auto engine shutdown and eco gauge lifting mode.

HX235

The HX220A 20-ton size class excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through auto engine shutdown and eco gauge lifting mode. The HX220 is also available in long reach configuration.

HX220

The Next Generation 320 medium excavator balances power, speed, and efficiency with 25% less fuel consumption using lower engine speed and a large hydraulic pump. Extended service intervals lead to 20% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The Next Generation 325 compact radius excavator provides premium performance and 25% more fuel efficiency. The 325 can be equipped with a blade and heavy counterweight to maximize performance and versatility. Extended service intervals lead to 25% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The Generation 10 SK210 bring more power and increased efficiency through Kobelco's ECO and S-modes that provide up to 10% fuel savings. The excavator offers a highly efficient hydraulic system that improves speed and productivity while boost mode provides that additional power for the toughest jobs.

SK210

The SY225C is powered by a Cummins diesel engine and reliable Kawasaki hydraulic components making the machine a versatile tool carrier. The mid-size excavator features an extended steel track for additional stability and can be configured with a quick coupler for easy attachment changeover.

SY225

Through improved hydraulics, the CX210D has more power with faster cycle times and is more responsive to operator inputs. The machine features a SCR Tier 4 Final solution that improves fuel efficiency while providing peak power.

CX210

The PC238US-11 tight tail swing excavator provides the power and stability you need in a compact package ideal for underground, utility, or general construction on cramped jobsites. The excavator is designed for exceptional stability and features a high boom raise angle for greater clearance, rounded cab design, arm quick return valve that reduces back pressure and fuel consumption, and optimized hydraulic flows for high digging forces.

PC238

The 210 X4 excavator meets T4F emissions regulations without the need for a DPF and delivers up to 12% improved fuel consumption. New electronic hydraulic pumps reduce cycles times and improve performance. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple. The 210 X4 is also offered in a long front configuration and a heavy duty configuration with a guarded high and wide undercarriage.

The EW220E is equipped with a powerful Volvo engine and precision hydraulics which offer operators optimal control and efficiency. The wheeled excavator features intuitive joystick controls, a heavy-duty two-piece boom that can reach 33 feet, grouped service points in wide-opening doors, and the option to add a Steelwrist tiltrotator.

EW220

The HX210A excavator provides similar performance to that of the HX220L but with standard features and a price appealing to rental houses. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn.

HX210

The Next Generation 320 GC medium excavator is designed to provide the lowest cost per hour with class-leading comfort and efficiency. The GC model comes at a lower price point without all of the added technology features which keeps operating simple. Extended service intervals lead to 25% lower maintenance costs and less downtime.

320 GC

The ZX250 mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX250

The PC240-11 mid-size excavator boasts quick response and smooth operation with extended dig depth and reach. The excavator features high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat. The PC240 is also available with a super long reach front.

PC240

The M322F wheeled excavator is simple to operate and offers fast cycle times, high breakout forces, and excellent lift capacity. The M322F provides up to 10% less fuel burn with easy-to-do maintenance and several boom and stick configurations to match the machine to the task at hand.

M322

The ZX210 mid-size excavator offers scalable technology options from entry-level 2D Grade Control or fully integrated Solution Linkage 3D. The excavator features an Izuzu T4F engine with no DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, and extended oil change intervals.

ZX210

The DX235LC-5 crawler excavator's near-zero tailswing design allows operators to work close to buildings and barriers in urban and roadwork applications. The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, reinforced frame and superstructure, and extended greasing intervals.

DX235

The Next Generation 323 medium excavator balances power, speed, and efficiency with 20% less fuel consumption using lower engine speed and a large hydraulic pump. Extended service intervals lead to 25% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The SK230SR short tail swing excavator boosts digging volume by as much as 8% and offers an efficient hydraulic system with ECO-mode to minimize operating costs. The excavator features an impressive working range, an iNDr Cooling System that ensures quiet operation free from dust, power boost and heavy lift modes, and a roomy cab with wide-opening doors.

SK230

The EC250E large excavator is built to move more for less with an efficient Volvo engine and optimized hydraulic system. In addition, the excavator offers Volvo's optional Dig Assist grade control apps, an industry-leading cab with excellent visibility, longer service intervals, and Volvo attachments and services.

EC250

The HW210 wheeled excavator is the largest of Hyundai's HW line designed for performance, fuel efficiency, and superior travel speeds. The machine features 3 power mode settings, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn.

HW210

The Next Generation M320 wheeled excavator is simple to operate and offers 16% more swing torque and reduced fuel and DEF consumption than previous models. The M320 features a new, larger comfortable cab, 10% reduction in maintenance parts, and 100% ground level maintenance. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

M320

The Next Generation M319 wheeled excavator’s compact radius design makes working in tight spaces easier. The M319 offers more swing torque and 10% lower maintenance costs with 100% ground level maintenance. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

M319

The ZX245 reduced-radius excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency suction-type fan, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX245

The CX245D SR was designed with a compact counterweight and modified boom placement for the tightest working conditions including road and bridge work, residential projects, and urban construction.

CX245 SR

The 245 X4 Spin Ace reduced tailswing excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple.

The 250 X4 excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple. The 250 X4 is also offered in a long front configuration and a heavy duty configuration with a guarded high and wide undercarriage.

The CX250D is designed for maximum reach in dredging, ditching, and clean-out applications. With a best-in-class, sealed, pressurized, and cushioned cab, operators can expect comfortable operation all day long.

CX250

The Next Generation 326 medium excavator is a versatile machine for medium and heavy duty applications that provides 10% more efficiency using 3 power modes and automatic engine speed control. Extended service intervals lead to 20% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The DX210W-5 is Doosan's largest and most capable wheeled excavator and offers multiple undercarriage configurations including a dozer blade or outriggers. The excavator features an advanced brake system, an Electronic Power Optimizing System, Smart Power Control, a spacious cab with better visibility, rearview camera, optional 2-way auxiliary hydraulics, durable chassis and front linkage, and centralize grease points.

DX210W

The 200G mid-size excavator balances power and hydraulic flow with Powerwise Plus hydraulic-management system. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The DX255LC-5 crawler excavator meets Tier 4 emissions standards using exhaust gas recirculation, a diesel oxidation catalyst (DOC), and selective catalyst reduction (SCR). The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, durable x-chassis, and extended greasing intervals.

DX255

The 245G reduced-radius excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine without DPF, high-efficiency suction-type fan, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The 250G mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The EC220E is designed to maximize efficiency with the latest fuel efficiency technologies and human-machine interface improvements. The mid-size excavator is built to last with heavy-duty components and is designed to quickly switch between a multitude of attachments with its optimized hydraulic system.

EC220

The EC200E is a 20 ton excavator is designed with Volvo reliability and engineering and provides long service intervals and easy routine maintenance to keep you up and running. The mid-size excavator is built to last with heavy-duty components and is designed to quickly switch between a multitude of attachments with its optimized hydraulic system.

EC200

The JS190 is a 19-ton excavator that has undergone rigorous testing and uses proven components to ensure quality and uptime for customers. The excavator features a 125 hp JCB EcoMAX engine, reinforced boom and stick, high-strength X-frame undercarriage, and JCB's quickhitch coupler system for fast attachment changes.

The 190G W wheeled excavator is powered by a 173 hp Tier 4 Final engine with 3 power modes to match the machine’s capabilities to your job. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility thanks to a new hood design, 1 or 2-piece boom options, and wide side panels that make maintenance easy.

190 W

The ZX190W wheeled excavator is powered by a 173 hp Tier 4 Final engine with 3 power modes to match the machine’s capabilities to your job. The excavator features an Izuzu T4F engine with no DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility thanks to a new hood design, 1 or 2-piece boom options, and wide side panels that make maintenance easy.

ZX190W

The Next Generation M318 wheeled excavator is simple to operate and offers 14% more swing torque and reduced fuel and DEF consumption than previous models. The M318 features a new, larger comfortable cab, full tiltrotator integration, advanced hydraulics, 10% reduction in maintenance parts, and 100% ground level maintenance. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

M318

The Generation 10 SK260 is more durable than ever with new technologies improving on fuel efficiency and power. The excavator offers a highly efficient hydraulic system that improves speed and productivity, while boost mode provides that additional power up to 42,000 lbs of digging force for the toughest jobs.

SK260

The HX260A excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through auto engine shutdown and eco gauge lifting mode.

HX260

The SY265C is Sany's most efficient mid-size excavator with selectable work modes to allow the operator to maximize fuel savings. The excavator features a high-performance cooling system with electronic fan clutch, powerful and reliable powertrain and hydraulic components, and optimized positive flow hydraulics.

SY265

The DX190W-5 wheeled excavator is easy to transport or travel between jobsites and offers multiple undercarriage configurations including a dozer blade or outriggers. The excavator features an oscillating front axle, an advanced disc brake system, a spacious cab with better visibility, rearview camera, optional 2-way auxiliary hydraulics, durable chassis and front linkage, and centralized grease points.

DX190W

The DX180LC-5 crawler excavator is a mid-size machine in the 40,000-pound size class that can dig up to 20 feet deep. The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, reinforced linkage, and extended greasing intervals.

DX180

The SK270SR short tail swing excavator boosts digging volume by as much as 7% and offers an efficient hydraulic system with ECO-mode to minimize operating costs. The excavator features an impressive working range, an iNDr Cooling System that ensures quiet operation free from dust, power boost and heavy lift modes, and a roomy cab with wide-opening doors.

SK270

The EC250E Hybrid excavator offers the power and performance of the standard EC250 with 15% reduction in fuel through the use of an accumulator which captures and reuses boom down energy. The hybrid system is easy to maintain with proven components and offers a sustainable solution that's also easy on your pocket book.

EC250 Hybrid

The 245XR has a reduced tailswing design that is 40% less than the 220X allowing it to work in congested, urban jobsites or up against road barriers. The excavator features rigorously tested components, seat-mounted joystick controls, recessed counterweight to protect the machine from damage, power boost, and the JCB CommandPlus comfort cab.

The ZX180 mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine with no DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX180

The HX160A excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn.

HX160

The HX180 excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features 3 power mode settings, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn.

HX180

The Next Generation 317 small excavator offers powerful hydraulics and improved stability with a new cab focused on operator comfort. Extended service intervals lead to 20% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

Volvo's 40 years of wheeled excavator engineering shines in the powerful and efficient EW160E. The mobile excavator features a stretched two-piece boom for extra reach, industry-leading cab visibility, an optional trailer hitch, and boom suspension system for faster travel on rough terrain.

EW180

The 150X is a 15-ton excavator that has undergone extensive testing and leverages proven components to ensure the machine's performance and reliability. The excavator features a 109 hp JCB EcoMAX engine that requires no DPF, a spacious JCB CommandPlus cab with low noise levels, proven Japanese hydraulics and X-frame undercarriage, and a dozer blade option for added versatility.

The Next Generation M314 wheeled excavator is simple to operate and offers 15% more swing torque and reduced fuel and DEF consumption than previous models. The M314 features a new, larger comfortable cab, tilt rotator integration, 10% reduction in maintenance parts, and 100% ground level maintenance. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

M314

The EWR170E features one of the shortest tail swings on the market. The excavator has a powerful engine and is equipped with the latest intelligent technologies. With improved visibility, ergonomic controls, the option of adding a Steelwrist tiltrotator, and Volvo support, you can be sure this 17 ton machine will work profitably on your next job.

EWR170

The 160G mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The HW180 wheeled excavator is the mid-size machine of Hyundai's HW line designed for performance, fuel efficiency, and superior travel speeds. The machine features 3 power mode settings, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn.

HW180

The ZX300 mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX300

The SK170 is a 127 hp excavator in the 17 ton size class that is powerful yet quiet enough to work in confined or restricted zones. The machine features NEXT-3E power/efficiency balancing technology, enhance multi-function capabilities, an attachment selection system that adjusts preset flow and pressure settings, and premium comfort options for all-day operation.

SK170

The JS160 is a 17-ton excavator that has undergone rigorous testing and uses proven components to ensure quality and uptime for customers. The excavator features a 125 hp JCB EcoMAX engine, reinforced boom and stick, high-strength X-frame undercarriage, and JCB's quickhitch coupler system for fast attachment changes.

The EC300E large excavator is built to move more for less with an efficient Volvo engine and optimized hydraulic system. In addition, the excavator offers Volvo's optional Dig Assist grade control apps, an industry-leading cab with excellent visibility, longer service intervals, and Volvo attachments and services.

EC300

The 160 X4 excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple.

The DX170LC-5 crawler excavator is designed for light-duty excavation and easy transportation with a narrow width and reduced weight to keep combined hauling weight under 80,000 lbs. The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, reinforced linkage, and extended greasing intervals.

DX170

The E165 large excavator is ideal for heavy digging and lifting applications. The conventional tailswing machine offers 4 power modes and class leading hydraulics. The E165 features a large, sealed cab with heated seat, wide access panels, hinged belly pan, central grease banks, and standard rear and side cameras.

E165

The ZX160 mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine with no DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX160

The Next Generation 317 GC small excavator is designed to provide the lowest cost per hour with class-leading comfort and efficiency in an easy-to-transport package. The GC model comes at a lower price point without all of the added technology features which keeps operating simple. Extended service intervals lead to 20% lower maintenance costs and less downtime.

317 GC

The ED160 Blade Runner is powered by a T4F Isuzu engine and offers a 6-way dozer blade that can perform some serious grading and dozing. The excavator features enhanced multi-function capabilities with attachment mode selection, an iNDr Cooling System that ensures quiet operation free from dust, simple operation with premium comfort features, an Eagle Eye 3 camera system, and the largest monitor in the industry at 10 inches.

ED160

The Next Generation M317F wheeled excavator’s compact radius design makes working in tight spaces easier. The M317F offers more swing torque and 5% lower maintenance costs with 100% ground level maintenance. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

M317

The Next Generation M316 wheeled excavator is simple to operate and offers 14% more swing torque and reduced fuel and DEF consumption than previous models. The M316 features a new, larger comfortable cab, 10% reduction in maintenance parts, and 100% ground level maintenance. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

M316

The EC160E is designed to maximize efficiency with the latest fuel efficiency technologies and human-machine interface improvements. The mid-size excavator is built to last with heavy-duty components and is designed to quickly switch between a multitude of attachments with its optimized hydraulic system.

EC160

The 300 X4 excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple. The 300 X4 is also offered in a heavy duty configuration with a guarded high and wide undercarriage.

The powerful CX300 delivers up to 6% greater breakout forces through improved hydraulic pumps and valves. Advanced sensors monitor the operator's input and machine response to deliver the right amount of hydraulic pressure and flow when and where it's needed.

CX300

The PC290-11 mid-size excavator is designed for maximum reach with a heavy duty undercarriage that provides added stability. The excavator features high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat. The PC290 is available in super long reach, log loader, and iMC grade control configurations.

PC290

Volvo's 40 years of wheeled excavator engineering shines in the powerful and efficient EW160E. The mobile excavator features a range of available configurations including a hydraulic elevated cab with excellent visibility, optional trailer hitch, and boom suspension system for faster travel on rough terrain.

EW160

The Next Generation 330 GC medium excavator is designed to provide the lowest cost per hour with class-leading comfort and efficiency. The GC model comes at a lower price point without all of the added technology features which keeps operating simple. Extended service intervals lead to 25% lower maintenance costs and less downtime.

330 GC

The DX140LCR crawler excavator's reduced tailswing design and T4F engine with 4 unique power modes offer operators unmatched efficiency and versatility. The excavator features an optional backfill blade, Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, durable x-chassis, and extended greasing intervals.

DX140R

The JZ141 is the only 14 ton excavator on the market that doesn't require a DPF or emissions aftertreatment making the reduced tailswing machine ideal for owners seeking a low-maintenance solution. The excavator features a 74 hp JCB EcoMAX engine, multiple work modes, a quiet and ergonomic cab, and a dozer blade for added versatility.

The SY155U minimal tail swing excavator is powered by an efficient Isuzu engine and is designed to be easily transportable to street-ready projects. The excavator features a steel track with optional bolt-on rubber pads, a quick coupler option, and a minimal transportation width of 102".

SY155

The Generation 10 SK300 is more durable than ever with new technologies improving on fuel efficiency and power. The excavator offers a highly efficient hydraulic system that improves speed and productivity, while boost mode provides that additional power for the toughest jobs.

SK300

The Next Generation 330 medium excavator is the most powerful and productive machine in its class with&nbsp; 20% more fuel efficiency. Extended service intervals lead to 25% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The EWR150E is a short swing radius wheeled excavator built to work in confined spaces. The excavator was extensively tested to ensure optimal productivity, durability, and profitability. With improved visibility thanks to a low superstructure, the option of adding a Steelwrist tiltrotator, and Volvo support, you can't go wrong with this 15 ton machine.

EWR150

The E145 large excavator is a 15-ton machine ideal for roadwork, infrastructure, and commercial applications. The reduced tailswing machine offers 4 power modes and class leading hydraulics. The E145 features a large, sealed cab with heated seat, wide access panels, hinged belly pan, central grease banks, and standard rear and side cameras.

E145

The Next Generation M315 wheeled excavator’s compact radius design makes working in tight spaces easier. The M315 offers more swing torque and 5% lower maintenance costs with 100% ground level maintenance. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

M315

The EC300E Hybrid excavator offers the power and performance of the standard EC300 with 15% reduction in fuel through the use of an accumulator which captures and reuses boom down energy. The hybrid system is easy to maintain with proven components and offers a sustainable solution that's also easy on your pocket book.

EC300 Hybrid

The PC138 small excavator is a compact radius tail swing model designed for working in tight spaces like roadways, bridges, or urban jobsites. The excavator is designed for exceptional stability and features a high boom raise angle for greater clearance, rounded cab design, arm quick return valve that reduces back pressure and fuel consumption, and optimized hydraulic flows for high digging forces.

PC138

The 300G mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The TB2150 is Takeuchi's largest and most powerful excavator now with a redesigned cab. With a standard pivot boom and dozer blade, the TB2150 is built for heavier application such as digging foundations and utility work. The machine features smooth operation thanks to a variable displacement piston pump, a standard long stick with thumb mount, 3 auxiliary circuits, load-sensing two-speed travel, cushioned cylinders that protect the machine from shock, and durable steel body panels with heavy-duty counterweight to protect internal components.

TB2150

The DX300LC-5 crawler excavator is a well balanced 30-metric ton machine that can tackle larger projects with the reduced operating costs of a smaller machine. The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, reinforced frame and superstructure, and extended greasing intervals.

DX300

The CX160D provides more digging and lifting power with greater fuel efficiency. Experience the redesigned cab and simplified maintenance with oil sample ports, grouped service points, tilt-out coolers, and auto-locking side panels.

CX160

The Next Generation 315 GC compact radius excavator is designed to provide the lowest cost per hour with class-leading comfort and efficiency. The GC model comes at a lower price point without all of the added technology features which keeps operating simple. Extended service intervals lead to 25% lower maintenance costs and less downtime.

315 GC

The Next Generation 315 compact radius excavator offers powerful hydraulics and swing torque with a new cab focused on operator comfort. The 315 can be equipped with a blade and rubber pads and is ideal for tight, urban jobsites. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The 145 X4 Spin Ace reduced tailswing excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple.

The R 924 has received a Generation 8 update which includes enhanced performance with better ergonomics and comfort. The excavator features a T4F engine with automatic idle-stop, long-life components with auto-lube, a strong X-frame undercarriage, simple ground-level service, and panoramic visibility with rear and right cameras. The R 924 is also available in a Compact Tunnel configuration.

Liebherr R 924

Similar Models

Komatsu PC210

Sany SY215

John Deere 210

Doosan DX225

Volvo ECR235

JCB 220

Kobelco SK210 Hybrid

Hyundai HX235

Hyundai HX220

Caterpillar 320

Caterpillar 325

Kobelco SK210

Compare quotes from the world's top equipment manufacturers