operatingWeight

netPower

undercarriage

tailSwing

The 870G large excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

870 (Excavator)

The ZX870 large excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX870

The Generation 10 SK850 delivers class-leading digging forces and a large working range paired with a 17% reduction in fuel burn. Kobelco's largest excavator features the iNDR noise and dust reduction system, independent travel, no-limit power boost, and an extended warranty out to 3 years or 3,000 hours.

SK850

The PC800-8 large excavator is designed for mass excavation and mining applications. The excavator features 2 working modes, smooth mode for boom shock absorption, Super Digger configuration with 2 stick cylinders, spacious cab with multi-position controls, and rear-view monitoring system.

PC800

The CX800B provides a boost in productivity and horsepower while at the same time delivering on the fuel efficiency you expect. Creature comforts include improved visibility and a new seat that accommodates operators of all sizes and provides built-in lumbar support to reduce operator fatigue.

CX800

The EC950E is Volvo's largest excavator and offers maximum digging and lifting forces for quarry and mass excavation work. The 90 ton machine was built to last with easy and convenient service access and seamless machine monitoring through Volvo ActiveCare Direct.

EC950

The DX800LC-5 80-ton large excavator leverages smart technologies and a durable design to excel in mining, quarry, and infrastructure applications. The excavator features a double-foot boom design, standard, long, and mass excavation arm options, D-ECOPOWER fuel saving system, boom and swing priority modes, 360-degree cameras, a spacious cab with 8-inch touch screen and larger foot pedals, and an optional auto-lube system.

DX800

The HX900 large excavator is ideal for large construction and mining applications and uses proven components that have been tested through thousands of hours of operation. The machine features variable power control with 3 work modes, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and up to a 10% reduction in fuel burn.

HX900

The Next Generation 395 large excavator is larger and more productive than the 390F with 10% more swing torque and stick force. Durability improvements including double the durability of the boom, stick, and frames as well as extended service intervals lead to 20% less maintenance cost. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The EC750E offers the perfect balance of power and stability with its 502 hp Volvo D16 engine, heavy-duty front, and Volvo support to keep you up and running in the toughest applications.

EC750

The CX750D is Case's largest and most powerful excavator yet. It features 512 gross hp with 75,000 lbs of digging force. With an option mass excavation configuration, the CX750D offers faster cycle times with larger capacity buckets.

CX750

The 750 X4 excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple.

The Next Generation 374 large excavator provides more production and 10% more swing torque with the ability to load up to 33 trucks (40 ton) per hour. Durability improvements including double the durability of the boom, stick, and frames as well as extended service intervals lead to 20% less maintenance cost. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The 670G large excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

670 (Excavator)

The ZX670 large excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX670

The PC650-11 large excavator has a dual swing motor and three stick options for adaptability to any production environment. The excavator features increased horsepower and hydraulic efficiency, reinforced steel in the undercarriage and front, quick return circuit for fast cycle times, simplified maintenance, and is easily transportable with less disassembly required.

PC650

The PC1250-11 large excavator has a long boom and three stick options for versatility and extended reach and depth ideal for construction and deep utility work. The excavator features increased horsepower and hydraulic efficiency, reinforced steel in the undercarriage and front, improved serviceability, and a new cab with optional 45-degree hydraulic access ladder.

PC1250

The HX520A excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine with 3 power modes, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through auto engine shutdown and eco gauge lifting mode.

HX520

The EC550E is a true 50-ton excavator delivering 25% more fuel efficiency and 20% more productivity through next generation electro-hydraulics and outstanding reliability. The large excavator features reduced maintenance requirements, unrivaled visibility, and 3-point right-hand side access for the highest level of safety.

EC550

The DX530LC-5 large excavator uses powerful hydraulic pumps to deliver outstanding performance and fuel efficiency. The excavator features an Electronic Power Optimizing System, durable x-chassis, a spacious cab with air-suspension seat and extra storage, and extended service intervals.

DX530

The EC530E is a true 50-ton excavator delivering 25% more fuel efficiency and 20% more productivity through next generation electro-hydraulics and outstanding reliability. The large excavator features reduced maintenance requirements, unrivaled visibility, and 3-point right-hand side access for the highest level of safety.

EC530

The SY500C is Sany's most powerful large excavator powered by a 400 hp Cummins engine that can dig more than 25 feet deep with nearly 62,000 lbs of breakout force. The excavator features selectable work modes to maximize fuel savings, powerful and reliable powertrain and hydraulic components, a high-performance cooling system, and a removable counterweight for easier transport.

SY500

The Generation 10 SK500 is built to move material efficiently with an increase in productivity of 7% and a reduction in fuel burn of 10% vs the previous generation. The large excavator features Kobelco's iNDR noise and dust reduction system, independent travel, no-limit power boost, and an extended warranty out to 3 years or 3,000 hours.

SK500

The 470G large excavator has 3 productivity modes to match the machine’s capabilities to your job along with the option for fully-integrated grade guidance. The excavator features a T4F engine with EGR and DPF, power-boost button, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The 490 X4 excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple.

The DX490LC-5 40-50 metric ton size class excavator has optimized its hydraulic and powertrain systems through improved feedback from the joysticks giving operators a smoother and more comfortable experience. The excavator features a durable x-chassis, a variable speed hydraulic fan, a spacious cab with air-suspension seat, a rearview camera and optional side camera, and extended service intervals.

DX490

Designed for mass excavation, the CX500D ME produces digging forces up to 70,000 lbf and offers high-capacity for moving more dirt. The CX500D offers innovative hydraulic systems, an industry-leading cab, and fuel-efficient power with a Tier 4 Final solution.

CX500 ME

The HX480A excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine with multiple power mode settings, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through auto engine shutdown and eco gauge lifting mode.

HX480

The ZX470 large excavator has 3 productivity modes to match the machine’s capabilities to your job along with the option for fully-integrated grade guidance. The excavator features an Izuzu T4F engine without DPF, power-boost button, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX470

The Next Generation 352 large excavator provides premium performance and 10% more fuel efficiency with the advanced C13 engine, hydraulic control, and a variable gauge undercarriage for addition stability. Extended service intervals lead to 15% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The CX490 Tier 4 Final excavator features improved hydraulics with new features including a control pattern selector, Free-Swing for improved craning, engine and oil sample ports, additional guard railings for safety, and a heated air-ride seat.

CX490

The Next Generation 349 large excavator provides premium performance and 10% more fuel efficiency with the advanced C13 engine and hydraulic control. Extended service intervals lead to 15% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The PC490-11 large excavator is built for the highest production applications with its high lift capacity, reinforced and stable undercarriage, and added durability. The excavator features high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat. The PC490 is available in super long reach, material handler, and iMC grade control configurations.

PC490

The EC480E large excavator is built to move more with 9% less fuel through a new electro-hydraulic control system and Volvo's ECO mode. In addition, the excavator offers a reinforced undercarriage, single module cooler reduces blockages, an industry-leading cab improved ergonomics, and Volvo's durable, purpose-built attachments.

EC480

The DX420LC-5 crawler excavator falls in the middle of the 40-50 metric ton size class with great durability for the toughest working environments. The excavator features a reinforced frame and superstructure, a spacious cab with air-suspension seat, 5 working modes, a rearview camera and optional side camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, and extended service intervals.

DX420

The HX380A excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through auto engine shutdown and eco gauge lifting mode.

HX380

The PC390-11 large excavator is ideal for high production earthmoving applications with its high lift capacity, reinforced and stable undercarriage, and added durability. The excavator features high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat. The PC390 is available in super long reach, waste handler, material handler, and iMC grade control configurations.

PC390

The 380G mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The SK390 comes with a high &amp; wide undercarriage for increased clearance and stability for heavy digging and lifting applications. The excavator features larger boom cylinders to provide that additional lift capacity and new safety features in the standard swing flashers and color rearview camera.

SK390

The EC380E large excavator is built to move more with 9% less fuel through a new electro-hydraulic control system and Volvo's ECO mode. In addition, the excavator a reinforced undercarriage, single module cooler reduces blockages, an industry-leading cab improved ergonomics, and Volvo's durable, purpose-built attachments.

EC380

The Generation 10 SK350 is one of the most versatile machines in the Kobelco line-up with new technologies and operator features making it a popular choice for heavy construction sites around the world. The excavator is powered by a Hino engine with NEXT-3E technology which perfectly balances power and efficiency. The machine also has several new safety features such as swing flashers and a color rearview camera.

SK350

The CX350 delivers improved performance and improved efficiency through CASE Intelligent Hydraulics System with a powerful Tier 4 Final engine. Improved speed, strength, and machine control are paired with improved cab comfort, all backed by ProCare machine protection.

CX350

The 350 X4 excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple. The 350 X4 is also offered in a long front configuration.

The ZX380 mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX380

The JS370 is a 37-ton excavator, the largest in the JCB line-up. The machine is engineered and vigorously tested for production environments where power and high lifting capacities are needed. The excavator features a 281 hp T4F MTU engine, nearly 60,000 lb of tear out force, a durable superstructure and doors, class-leading service access, and a spacious cab with excellent visibility.

The Next Generation 336 large excavator provides premium performance and 15% more fuel efficiency with the advanced C9.3B engine and electro-hydraulic control. Extended service intervals lead to 20% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The HB365-3 hybrid excavator employs a hybrid energy conservation system that regenerates swing energy and reduces fuel consumption by 20%. The excavator features a high-performance capacitor for storing energy, high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat.

HB365

The Next Generation 336 GC large excavator is designed to provide the lowest cost per hour with class-leading comfort and efficiency. The GC model comes at a lower price point without all of the added technology features which keeps operating simple. Extended service intervals lead to 20% lower maintenance costs and less downtime.

336 GC

The SY365C large excavator is designed to deliver reliable performance in the toughest earthmoving, demolition, and road building applications. The excavator features selectable work modes to maximize fuel savings, powerful and reliable powertrain and hydraulic components, and a high-performance cooling system with electronic fan clutch.

SY365

The DX350LC crawler excavator is a 80,000 lb machine built to work with 4 work modes: digging, lifting, breaker, and shear. The excavator features an efficient cooling system with variable speed hydraulic fan, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, durable x-chassis, and extended service intervals.

DX350

The EC350E large excavator is built to move more with 9% less fuel through a new electro-hydraulic control system and Volvo's ECO mode. In addition, the excavator offers a reinforced undercarriage, single module cooler reduces blockages, an industry-leading cab improved ergonomics, and Volvo's durable, purpose-built attachments.

EC350

The 345G reduced-radius excavator has a three-pump hydraulic system with dedicated swing pump that offers superior hydraulic flow and multifunction performance. The excavator features a T4F engine, full-size cab with ergonomic short throw levers, great all-around visibility, and ground-level daily checkpoint access.

The ZX345 reduced-radius excavator has a three-pump hydraulic system with dedicated swing pump that offers superior hydraulic flow and multifunction performance. The excavator features an Izuzu T4F engine without DPF, a full-size cab with ergonomic short throw levers, great all-around visibility, and ground-level daily checkpoint access.

ZX345

The PC360-11 large excavator is designed for applications that require long reach, heavy attachments, or serious over-the-side lifting capabilities. The excavator features high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat. The PC360 is available in super long reach, log loader, waste handler, and iMC grade control configurations.

PC360

The 350G mid-size excavator offers scalable technology options from entry-level Excavator Grade Guidance or fully integrated SmartGrade. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, and extended oil change intervals.

The ZX350 mid-size excavator offers scalable technology options from entry-level 2D Grade Control or fully integrated Solution Linkage 3D. The excavator features an Izuzu T4F engine without DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, and extended oil change intervals.

ZX350

The HX350A excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through auto engine shutdown and eco gauge lifting mode.

HX350

The Next Generation 335 compact radius excavator provides premium performance and 20% more fuel efficiency due to features like Smart Mode, a new hydraulic demand fan, hydraulic pump, and control valve. Extended service intervals lead to 25% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The JS330 is a 33-ton excavator built and vigorously tested for production environments where power and high lifting capacities are needed. The excavator features a 281 hp T4F MTU engine, over 50,000 lb of tear out force, a durable superstructure and doors, class-leading service access, and a spacious cab with excellent visibility.

The ECR355E is Volvo's largest short tail swing model. The large excavator is built to offer stability and greater lift capacities in a compact package. The machine features a Volvo D8 engine, an optional dozer blade, advanced electro-hydraulic controls, and a wide array of purpose-built Volvo attachments.

ECR355

The HX300A excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive-style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through auto engine shutdown and eco gauge lifting mode. The HX300 is also available in long reach configuration.

HX300

The CX290D Material Handler features a hydraulically controlled cab riser, longer boom &amp; stick with optimized hydraulics for machine and attachment functions. For the toughest waste and scrap applications, the machine has an anti-interference device to prevent contact with the machine's structure and additional cab and undercarriage guarding.

CX290 Material Handler

The DX300LC-5 crawler excavator is a well balanced 30-metric ton machine that can tackle larger projects with the reduced operating costs of a smaller machine. The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, reinforced frame and superstructure, and extended greasing intervals.

DX300

The 300G mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The EC300E Hybrid excavator offers the power and performance of the standard EC300 with 15% reduction in fuel through the use of an accumulator which captures and reuses boom down energy. The hybrid system is easy to maintain with proven components and offers a sustainable solution that's also easy on your pocket book.

EC300 Hybrid

The Generation 10 SK300 is more durable than ever with new technologies improving on fuel efficiency and power. The excavator offers a highly efficient hydraulic system that improves speed and productivity, while boost mode provides that additional power for the toughest jobs.

SK300

The Next Generation 330 medium excavator is the most powerful and productive machine in its class with&nbsp; 20% more fuel efficiency. Extended service intervals lead to 25% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The Next Generation 330 GC medium excavator is designed to provide the lowest cost per hour with class-leading comfort and efficiency. The GC model comes at a lower price point without all of the added technology features which keeps operating simple. Extended service intervals lead to 25% lower maintenance costs and less downtime.

330 GC

The PC290-11 mid-size excavator is designed for maximum reach with a heavy duty undercarriage that provides added stability. The excavator features high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat. The PC290 is available in super long reach, log loader, and iMC grade control configurations.

PC290

The powerful CX300 delivers up to 6% greater breakout forces through improved hydraulic pumps and valves. Advanced sensors monitor the operator's input and machine response to deliver the right amount of hydraulic pressure and flow when and where it's needed.

CX300

The 300 X4 excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple. The 300 X4 is also offered in a heavy duty configuration with a guarded high and wide undercarriage.

The EC300E large excavator is built to move more for less with an efficient Volvo engine and optimized hydraulic system. In addition, the excavator offers Volvo's optional Dig Assist grade control apps, an industry-leading cab with excellent visibility, longer service intervals, and Volvo attachments and services.

EC300

The ZX300 mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX300

The 245XR has a reduced tailswing design that is 40% less than the 220X allowing it to work in congested, urban jobsites or up against road barriers. The excavator features rigorously tested components, seat-mounted joystick controls, recessed counterweight to protect the machine from damage, power boost, and the JCB CommandPlus comfort cab.

The EC250E Hybrid excavator offers the power and performance of the standard EC250 with 15% reduction in fuel through the use of an accumulator which captures and reuses boom down energy. The hybrid system is easy to maintain with proven components and offers a sustainable solution that's also easy on your pocket book.

EC250 Hybrid

The SK270SR short tail swing excavator boosts digging volume by as much as 7% and offers an efficient hydraulic system with ECO-mode to minimize operating costs. The excavator features an impressive working range, an iNDr Cooling System that ensures quiet operation free from dust, power boost and heavy lift modes, and a roomy cab with wide-opening doors.

SK270

The SY265C is Sany's most efficient mid-size excavator with selectable work modes to allow the operator to maximize fuel savings. The excavator features a high-performance cooling system with electronic fan clutch, powerful and reliable powertrain and hydraulic components, and optimized positive flow hydraulics.

SY265

The HX260A excavator is useful in a wide array of applications and is known for its quick cycle times, impressive power, and proven components. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through auto engine shutdown and eco gauge lifting mode.

HX260

The Generation 10 SK260 is more durable than ever with new technologies improving on fuel efficiency and power. The excavator offers a highly efficient hydraulic system that improves speed and productivity, while boost mode provides that additional power up to 42,000 lbs of digging force for the toughest jobs.

SK260

The 245G reduced-radius excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine without DPF, high-efficiency suction-type fan, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The 250G mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features a T4F engine with EGR and DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

The DX255LC-5 crawler excavator meets Tier 4 emissions standards using exhaust gas recirculation, a diesel oxidation catalyst (DOC), and selective catalyst reduction (SCR). The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, durable x-chassis, and extended greasing intervals.

DX255

The Next Generation 326 medium excavator is a versatile machine for medium and heavy duty applications that provides 10% more efficiency using 3 power modes and automatic engine speed control. Extended service intervals lead to 20% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The CX250D is designed for maximum reach in dredging, ditching, and clean-out applications. With a best-in-class, sealed, pressurized, and cushioned cab, operators can expect comfortable operation all day long.

CX250

The CX245D SR was designed with a compact counterweight and modified boom placement for the tightest working conditions including road and bridge work, residential projects, and urban construction.

CX245 SR

The 245 X4 Spin Ace reduced tailswing excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple.

The 250 X4 excavator meets T4F emissions regulations without the need for a DPF. Improved spool stroke control distributes hydraulic oil more efficiently reducing cycles times and improving fuel efficiency. Operators will feel comfortable all day long in the roomiest cab in its class, and ground-level service points keep daily maintenance simple. The 250 X4 is also offered in a long front configuration and a heavy duty configuration with a guarded high and wide undercarriage.

The ZX245 reduced-radius excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency suction-type fan, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX245

The EC250E large excavator is built to move more for less with an efficient Volvo engine and optimized hydraulic system. In addition, the excavator offers Volvo's optional Dig Assist grade control apps, an industry-leading cab with excellent visibility, longer service intervals, and Volvo attachments and services.

EC250

The SK230SR short tail swing excavator boosts digging volume by as much as 8% and offers an efficient hydraulic system with ECO-mode to minimize operating costs. The excavator features an impressive working range, an iNDr Cooling System that ensures quiet operation free from dust, power boost and heavy lift modes, and a roomy cab with wide-opening doors.

SK230

The Next Generation 323 medium excavator balances power, speed, and efficiency with 20% less fuel consumption using lower engine speed and a large hydraulic pump. Extended service intervals lead to 25% lower maintenance costs and less downtime. As with all of Cat’s Next Gen. excavators, 2D Grade, Payload, Assist features, and E-Fence come standard increasing operator efficiency and safety.

The DX235LC-5 crawler excavator's near-zero tailswing design allows operators to work close to buildings and barriers in urban and roadwork applications. The excavator features an Electronic Power Optimizing System, auto shutdown, Smart Power Control to improve efficiency, a spacious cab with 7-inch color display, rearview camera, optional 2-way auxiliary hydraulics with foot pedal or joystick buttons, reinforced frame and superstructure, and extended greasing intervals.

DX235

The PC240-11 mid-size excavator boasts quick response and smooth operation with extended dig depth and reach. The excavator features high-strength steel castings on the boom, stick, and bucket linkage, load-sensing hydraulics, large displacement pumps, and a spacious, quiet cab with suspension seat. The PC240 is also available with a super long reach front.

PC240

The ZX250 mid-size excavator has 3 productivity modes to match the machine’s capabilities to your job along with a power-boost button for extra digging and lifting power. The excavator features an Izuzu T4F engine without DPF, high-efficiency fans with reversing option, ergonomic short throw levers, great all-around visibility, reinforced boom, and extended oil change intervals.

ZX250

The PC238US-11 tight tail swing excavator provides the power and stability you need in a compact package ideal for underground, utility, or general construction on cramped jobsites. The excavator is designed for exceptional stability and features a high boom raise angle for greater clearance, rounded cab design, arm quick return valve that reduces back pressure and fuel consumption, and optimized hydraulic flows for high digging forces.

PC238

The SY225C is powered by a Cummins diesel engine and reliable Kawasaki hydraulic components making the machine a versatile tool carrier. The mid-size excavator features an extended steel track for additional stability and can be configured with a quick coupler for easy attachment changeover.

SY225

The HX235A compact radius excavator is useful in a wide array of applications on tight jobsites where reliability is critical. The machine features a high-performance Cummins engine, attachment flow control settings, an automotive style display with haptic control, 360-degree camera system, and a 10% reduction in fuel burn through new features like auto engine shutdown and eco gauge lifting mode.

HX235

The SK210 Hybrid excavator uses a hybrid system with a generator, electric swing motor, and a lithium-ion battery to store and assist the engine during high-load operations. During swing deceleration or low-load operations, the battery is recharged all adding up to a 15% reduction in fuel burn, 7% increased productivity, and 88% decrease in NOx emissions.

SK210 Hybrid

The 220X is the first of JCB's new X SERIES, the most advanced tracked excavator in JCB history with exceptional performance and reliability. The 20-ton excavator features best-in-class tear out forces, large-diameter hydraulic hoses, auto-stop and auto-idle for added fuel savings, customizable proportional controls, power boost, and the JCB CommandPlus comfort cab.

The ECR235E provides the smooth and efficient operation you're used to in a compact, short swing design. The mid-size excavator is built with the operator in mind with a new comfort cab and is designed to quickly switch between a multitude of attachments with its optimized hydraulic system.

ECR235

The R 976 excavator is built on a modified version of the R 976 undercarriage with heavy counterweight for mass excavation applications. The excavator features a T4F Liebherr engine with auto-idle, 4 working modes, boom float for increased flow to other cylinders, vertically-integrated key components, and improved visibility with 360-degree camera option. The R 976 is also available in a plug-in electric option fully designed and manufactured by Liebherr.

Liebherr R 976

Similar Models

John Deere 870 (Excavator)

Hitachi ZX870

Kobelco SK850

Komatsu PC800

Case CX800

Volvo EC950

Doosan DX800

Hyundai HX900

Caterpillar 395

Volvo EC750

Case CX750

Link-Belt 750

Compare quotes from the world's top equipment manufacturers